top of page

Power Resistors

EBG is leading in the development of power resistors that are particularly compact and powerful. These resistors regulate power peaks, such as those that occur when high-end electronic devices are switched on and off, and they divert power surges. They also help regulate the rotational speed of electric motors such as those used in industrial equipment and in vehicles like trams and locomotives. In offshore wind farms and substations, they assist in effecting the transmission of energy produced on direct current basis.

Leading manufacturers of electric motors, medical equipment and frequency converters rely on EBG power resistors because of their powerful performance and the long-term operating reliability.

Series LXP-18 TO-220

18 W Thick Film Power Resistors for high-frequency and pulse-loading applications. Single screw mounting.

      Features

  • 18 W operating power

  • TO-220 package configuration

  • Tolerance range ±10 % to ±0.5 %

  • Ohmic range 0.05 Ω to 1 MΩ (higher value on request)

  • Temperature coefficient ±50 ppm/°C for ≥ 10 Ω

  • Non-Inductive design

  • ROHS conform

 

     Typical applications

  • Power supplies

  • Motor Drives & Controls

  • Electric Vehicle

  • Converters

  • Medical

  • Instrumentation

  • Traction

  • Welding

Downloads

Series LXP-100 B TO-247

100 W Thick Film Power Resistors for high-frequency and pulse-loading applications. Version B for enforced mechanical stability.

Downloads

      Features

  • 100 W operating power

  • TO-247 package configuration

  • Tolerance range ±10 % to ±1 %

  • Ohmic range 0.05 Ω to 1 MΩ (higher value on request)

  • Temperature coefficient ±50 ppm/°C for ≥ 10 Ω (lower TCR on request)

  • Non-Inductive design

  • ROHS conform

 

     Typical applications

  • Power supplies

  • Motor Drives & Controls

  • Electric Vehicle

  • Converters

  • Medical

  • Instrumentation

  • Traction

  • Welding

Series MXP 35 TO-220

35 W Thick Film Power Resistors for high-frequency and pulse-loading applications. Single screw mounting.

     Features

  • 35 W operating power

  • TO-220 package configuration

  • Tolerance range ±10 % to ±0.5 %

  • Ohmic range 0.05 Ω to 1 MΩ (higher value on request)

  • Temperature coefficient ±50 ppm/°C for ≥ 10 Ω

  • Non-Inductive design

  • ROHS conform

 

     Typical applications

  • Power supplies

  • Motor Drives & Controls

  • Electric Vehicle

  • Converters

  • Medical

  • Instrumentation

  • Traction

  • Welding

Downloads

Series AXP-100 B

100 W resistors with 4 wire terminals Version B for enforced mechanical stability.

     Features

  • 35 W operating power

  • TO-220 package configuration

  • Tolerance range ±10 % to ±0.5 %

  • Ohmic range 0.05 Ω to 1 MΩ (higher value on request)

  • Temperature coefficient ±50 ppm/°C for ≥ 10 Ω

  • Non-Inductive design

  • ROHS conform

 

     Typical applications

  • Power supplies

  • Motor Drives & Controls

  • Electric Vehicle

  • Converters

  • Medical

  • Instrumentation

  • Traction

  • Welding

Downloads

Series HXP 200 SOT 227 Housing

200 W resistor in "ISOTOP" power device. 5 different layouts available. Easy mounting to heat sink.

     Features

  • 1 x 200 W / 2 x 80 W / 3 x 45 W operating power

  • Tolerance range ±10 % to ±1 %

  • Ohmic range 0.1 Ω to 1 MΩ

  • Temperature coefficient ±250 ppm/°C ≥ 1 Ω (lower TCR on request)

  • Non-Inductive design

  • ROHS conform

​

     Typical applications

  • Motor Drives & Controls

  • Power Supplies

  • Control Devices

  • Telecommunications

  • Robotics

  • Medical

  • Regen Energy

  • Traction

  • Welding

  • Electric Vehicle

Downloads

bottom of page